Help with your Project

• N

  Do you have any example of SPI code with low.js ?
  • nicolas  

  2
  0
  Votes
  2
  Posts
  8
  Views

  

  No, there is no code example. If you want to build one and are willing to share it, I would gladly add it to https://github.com/neonious/lowjs_esp32_examples/tree/master/drivers Thomas
• P

  Building firmware - Adding files failed
  • PastorPanda  

  9
  0
  Votes
  9
  Posts
  31
  Views

  

  lowsync now shows the correct 507 no space error in this case. I tried out express myself. It runs out of memory, correct? Have this in the list for some time in the future. Till then, I would recommend not to use express. It is, after all, a large framework, and even when it works, it will be slowing down the microcontroller much.
• N

  Send Data with socket.io trought ethernet with an Poe Splitter.
  • nicolas  

  2
  0
  Votes
  2
  Posts
  12
  Views

  

  Finally back from vacation! As answered directly after you sent the question via email on the same day: socket.io works with low.js. I am sorry, neonious one does not support PoE! To give some more insight: A PoE Splitter will work. The neonious one has 100 Mbit, so it only needs 4 of 8 pins There is currently no plan of supporting PoE. Maybe you want to take a look at the ESP32 Ethernet Kit Board, it is fully supported by low.js! Link: https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-ethernet-kit.html Regards, Thomas
• 

  Project for an Autonomous Sailing Boat
  • ygageot  

  58
  1
  Votes
  58
  Posts
  86
  Views

  

  @neoniousTR Good vacation !
• B

  Problem with DHT11.js
  • Bouvin  

  7
  0
  Votes
  7
  Posts
  20
  Views

  B

  Right, it is connected to a breadboard, and twiddling the components a bit do help, so it is probably a poor connection. Thank you for your help.
• A

  about package browsing
  • artramo  

  2
  0
  Votes
  2
  Posts
  12
  Views

  

  Theoretically, all npm modules can be installed. Over 350,000. Just too many packages to show. So, no.. But you can look for the package you want to have elsewhere, maybe at npmjs.com, and then when you know the package, install it through the IDE.
• F

  Set wifi settings error.
  • filipbaza  

  3
  0
  Votes
  3
  Posts
  25
  Views

  

  I do not think this is a bug. The password belongs into lowsync.auth.config.json, not into lowsync.config.json . Reason for this is to have a seperate file which might not go into your repository but rather stay local. If you add the password in lowsync.auth.config.json like this: { "password":"12345678" } Does it work? Thank you, Thomas